Topic: 2.0 block 2.2 heads (Read 1097 times)

beat22 · « **on:** June 17, 2005, 10:59:25 AM »

would there be any problems in doing this?...could i use me 2.2 intake and allmy electronics work?... also would i be able to just use wrx exaust to, my brother gave me a rayjay turbo and a fmic and some misc hoses and guages from a turbo vw dasher wagon he built... anyways back on topic... has anyone seen this setup before...seems like the wrx block would be easier(cheaper) to source than a 2.2t or 2.5t....... thanx

FastfreddyRs · « **Reply #1 on:** June 17, 2005, 04:48:07 PM »

I believe it can be done, you might not be able to get enough flow with the 2.2 heads but physical it should all bolt up. i think.

skyphix · « **Reply #2 on:** June 17, 2005, 06:19:35 PM »

You'd probably be better off with a 2.0 block and the cheap 2.5 heads.

beat22 · « **Reply #3 on:** June 17, 2005, 09:18:39 PM »

ok so if it will bolt up will i need head gaskets designed for the head or the block?...or custm... what about my compression ratio?... sorry im fully of questions now =P

Author Topic: 2.0 block 2.2 heads (Read 1097 times)