Topic: Question on camber kit... (Read 1572 times)

ed · « **on:** January 02, 2004, 12:07:36 PM »

i'm most likely gettin Eibachs (1.3" F, 1.0" B) springs.

you think i'll need a camber kit?

and if anyone thinks Eibachs blow donkey nuts, let me know what you suggest

Fullbird14 · « **Reply #1 on:** January 02, 2004, 12:23:28 PM »

haha, he said "blow donkey nuts"...I just found that funny

ScreaminFast · « **Reply #2 on:** January 02, 2004, 08:34:32 PM »

Eibachs are nice, I'd get the $50 camber bolts, couldn't hurt. Also then you'll have more control over camber...

I run -1.5 all around, and 0 toe all around, but you may want to run less.

ed · « **Reply #3 on:** January 02, 2004, 10:33:07 PM »

neato, got the Eibachs along with the rear cam bolts

should be here shortly...

hey Mike, did you do your alignment around here or back in Roch?

ScreaminFast · « **Reply #4 on:** January 04, 2004, 11:37:40 AM »

Broadway Auto in albany. They'll do custom alignments for you. You can tell them I sent ya. They should remember me by my car. I got -1.5 all around. That should be real nice with those MX's I gave ya, and shouldn't affect wear too much. Just don't get any toe in or out. That will effect wear even more.

ed · « **Reply #5 on:** January 04, 2004, 02:18:53 PM »

Quote from: ScreaminFast

Broadway Auto in albany. They'll do custom alignments for you. You can tell them I sent ya. They should remember me by my car. I got -1.5 all around. That should be real nice with those MX's I gave ya, and shouldn't affect wear too much. Just don't get any toe in or out. That will effect wear even more.

aights!

Author Topic: Question on camber kit... (Read 1572 times)