Topic: RPI Autoshop (Read 15820 times)

kevkel33leg05 · « **Reply #50 on:** May 04, 2009, 11:31:45 PM »

Thanks man!

korpsepatrol · « **Reply #51 on:** May 05, 2009, 11:36:45 AM »

Just wanted to say thanks to all who helped with the install especially kev, rubble and nismonic. Fun times with the trials and tribulations of a stage 2 install. I will try to take pics of befores and afters like kev did on the progress of the lgt.

Stuff i have and not installed yet:
Front lip
Spats
Avo Catch Can
Zero Sports air diverter
Brembos(still need rotors and adapter for the rears)
Fujita CAI(on the fence about this, worked awesome but its a bit loud)

RubbleDTD · « **Reply #52 on:** May 06, 2009, 05:48:52 AM »

^^ Be sure to give me a heads up when you wanna do those brakes. I would be stoked to help out with that one

DvSkD4 · « **Reply #53 on:** May 12, 2009, 09:30:33 PM »

Is the shop closed for the summer now?

DvSkD4 · « **Reply #54 on:** September 03, 2009, 08:46:15 PM »

Back to school time ... I will be using the shop at some point soon to replace my clutch among other things.

spoolordie · « **Reply #55 on:** September 05, 2009, 03:02:28 PM »

oh noes not teh clutch

should be not to bad with that nice lift rpi haz lol

aldog1330 · « **Reply #56 on:** September 29, 2009, 09:12:16 AM »

Are the hours still the same for the autoshop? My Z is sitting currently needing pads and rotors. I have the parts now, just no place to swap them out.

spoolordie · « **Reply #57 on:** September 29, 2009, 09:17:23 AM »

well i have tools and a drive way and everything you need to do a brake job if you wanted we could put them in i know its easier on a lift but its just a brake job lol

WaynO · « **Reply #58 on:** September 29, 2009, 12:00:02 PM »

Quote from: aldog1330 on September 29, 2009, 09:12:16 AM

Are the hours still the same for the autoshop? My Z is sitting currently needing pads and rotors. I have the parts now, just no place to swap them out.

Hours are still the same, when are you thinking about coming by?

aldog1330 · « **Reply #59 on:** September 29, 2009, 01:22:24 PM »

Not sure yet, I definitely want to get them done this week sometime.

spoolordie, thanks for the offer. definitely not worried about the lift. only worried about how hard i have to hit the rear rotors with a hammer (that and i've never done brakes, but deadlydave said he'd help me out when the time comes). the Z has brembo's and they look stupid easy to swap out.

aldog1330 · « **Reply #60 on:** September 29, 2009, 01:42:07 PM »

Quote from: WaynO on September 29, 2009, 12:00:02 PM

Hours are still the same, when are you thinking about coming by?

After talking to Dave, we are thinking Friday, if thats possible.

aldog1330 · « **Reply #61 on:** October 02, 2009, 08:44:09 AM »

Deadlydave and I will be at the autoshop around 5pm tonight to knock out the brakes on my Z. Will anyone be over there/want to swing by?

ssgtshields · « **Reply #62 on:** October 03, 2009, 08:51:49 PM »

Thanks to everyone that helped last night. Great shop and setup.

deadlydave · « **Reply #63 on:** October 03, 2009, 11:21:08 PM »

Quote from: ssgtshields on October 03, 2009, 08:51:49 PM

Thanks to everyone that helped last night. Great shop and setup.

Good to see some new faces and some old friends. I think i'm going to start volunteering there a few days a week.

ssgtshields · « **Reply #64 on:** October 04, 2009, 03:40:53 PM »

I'd like to do the same. Dave, let me know about that front sway bar.

aldog1330 · « **Reply #65 on:** October 04, 2009, 04:49:55 PM »

It was nice to meet you guys... I think I will stop by more just to hang out.

Zeeeek · « **Reply #66 on:** October 05, 2009, 10:03:05 AM »

$4 per sounds choice for tire mounting.......

aldog1330 · « **Reply #67 on:** October 06, 2009, 10:28:40 AM »

Shop still open on Thursdays? If so I might be swinging by to swap out the front brakes and bleed the system.

gebby1029 · « **Reply #68 on:** October 06, 2009, 12:44:45 PM »

Could anyone meet there on a Friday, Saturday, or Sunday that has experience with drum brakes?

My girlfriend may need some new ones or a spring replaced (not sure yet) and I've never worked on them before.

WaynO · « **Reply #69 on:** January 19, 2010, 07:10:06 PM »

Going to bump this up cause people have been asking about the shop lately. Is there a way to get this stickied by any chance?

korpsepatrol · « **Reply #70 on:** January 19, 2010, 08:21:57 PM »

Holy sweetness! I will soon be coming to install my stuffs for my spec b! YAY i didn't know this was still open to us!

DvSkD4 · « **Reply #71 on:** January 19, 2010, 10:29:31 PM »

2nd getting this thread stickied

LiamWRX06 · « **Reply #72 on:** January 19, 2010, 11:24:20 PM »

i 3rd it bc i will be there this saturday

gebby1029 · « **Reply #73 on:** January 19, 2010, 11:31:51 PM »

I 4th it because I have some exhaust modifications i'm interested in doing but I don't have the tools.

ctt1128 · « **Reply #74 on:** January 20, 2010, 10:12:23 AM »

5th because i have been at the shop every day for the past two weeks with brain working on our cars haha

Author Topic: RPI Autoshop (Read 15820 times)