Topic: RPI Autoshop (Read 12732 times)

idipskoalmint · « **Reply #125 on:** March 13, 2010, 08:48:55 PM »

Quote from: LarenF3D5 on March 13, 2010, 05:46:55 PM

Hella Supertones
Front EGT Resistor Fix
Rear Strut Tower brace

Quote from: deadlydave on March 13, 2010, 07:52:56 PM

Andy I'd also be willing to lend a hand with Matt and help you out in a driveway as the weather warms.

Andy -

These all are pretty easy, and there's absolutely no reason to get the car in the air at all. As both of you know, my driveway isn't really suitable for anything where you have to lie on the ground (since it's gravel). If you guys want to get these things done sometime in the next few weeks, we can figure something out. Now that the weather is getting nicer, I've started grilling again, so we can have some good eats as a reward for a "job well done". The only tool I don't have for a Hella install is a crimper for the wires.

Bring some good beer we can drink during/after the install, and we're even

Matthew

gebby1029 · « **Reply #126 on:** March 13, 2010, 10:55:27 PM »

A) Does the shop have the tools to cut open my '04 WRX's stock exhaust, cut piping to specific angles and lengths (stainless steel), and weld it all back together?

B) Can someone there give me some pointers on doing the above?

Not sure when this would be...

deadlydave · « **Reply #127 on:** March 14, 2010, 03:06:06 AM »

Quote from: gebby1029 on March 13, 2010, 10:55:27 PM

A) Does the shop have the tools to cut open my '04 WRX's stock exhaust, cut piping to specific angles and lengths (stainless steel), and weld it all back together?

B) Can someone there give me some pointers on doing the above?

Not sure when this would be...

Nope, it's pretty much wrenching only with tire mount/balance, a lift, and air tools.

gebby1029 · « **Reply #128 on:** March 14, 2010, 06:25:13 AM »

Damn. Now I'm back to square one.

mrplow83 · « **Reply #129 on:** March 14, 2010, 04:21:51 PM »

mmm...grill I have a Perrin TMIC that needs to be installed....but mostly i want burger

korpsepatrol · « **Reply #130 on:** March 14, 2010, 10:47:41 PM »

I am down to pass by if people need a hand or two, i gotta start doing my waves of installs too.

RS25BG · « **Reply #131 on:** March 14, 2010, 11:25:37 PM »

ah not really too worried now...since i have resources at work. im doing lowering springs and my big tmic this coming weekend at my house oh what fun that should be

RC1488RPI · « **Reply #132 on:** March 22, 2010, 08:22:19 PM »

The Auto Shop has a new site. Check it out for information and such:

http://autoshop.union.rpi.edu/?q=home

deadlydave · « **Reply #133 on:** April 28, 2010, 10:06:16 PM »

Howdy Howdy, THink I can squeeze in a pair of tires for a mount/balance at the shop tomorrow?

RedRoof2 · « **Reply #134 on:** April 28, 2010, 10:23:12 PM »

I'm thinking I'll see if I can get the Jeep up there saturday afternoon for a quick oil change + tire rotation/rebalance.

Does the autoshop have a grease gun or should I bring my own?

Nismonic · « **Reply #135 on:** April 28, 2010, 10:54:37 PM »

Quote from: RedRoof2 on April 28, 2010, 10:23:12 PM

I'm thinking I'll see if I can get the Jeep up there saturday afternoon for a quick oil change + tire rotation/rebalance.

Does the autoshop have a grease gun or should I bring my own?

Bring your own... if they have one it is probably broken or turned into a flesh light or some shit...

Kavik · « **Reply #136 on:** April 29, 2010, 10:27:35 AM »

Quote from: Nismonic on April 28, 2010, 10:54:37 PM

Bring your own... if they have one it is probably broken or turned into a flesh light or some shit...

that's...utterly.....repulsive.
:threwupalittleinmymouthsmiley:

Nismonic · « **Reply #137 on:** April 29, 2010, 10:41:12 AM »

Quote from: Kavik on April 29, 2010, 10:27:35 AM

that's...utterly.....repulsive.
:threwupalittleinmymouthsmiley:

It's always safer to bring your own specialty tools, solvents, funnels to the shop than to assume that they will have one in working order. Hell, we had trouble finding a good funnel to put gas in someone's car last weekend... Most of the older tools that arent used often have been modified for a different purpose or been taken apart to use as parts for a more frequently used tool. I know there are pieces of a pnumatic grease gun around the shop but I dont know if it was ever reassembled... and I doubt they have any grease cartridges anyway.

Kavik · « **Reply #138 on:** April 29, 2010, 10:48:30 AM »

I just meant the fleshlight bit.....the image I couldn't stop from forming in my mind was pretty horrid

korpsepatrol · « **Reply #139 on:** June 02, 2010, 03:41:37 PM »

Is there always someone there that can instruct me on how to dismount tires? I never had a chance to use the machine.

kidzhc40 · « **Reply #140 on:** June 02, 2010, 03:52:50 PM »

Quote from: korpsepatrol on June 02, 2010, 03:41:37 PM

Is there always someone there that can instruct me on how to dismount tires? I never had a chance to use the machine.

I can show you ill be there this week prolly friday around 6, but normally yeah someones there...

korpsepatrol · « **Reply #141 on:** June 02, 2010, 03:58:19 PM »

awesome, i hope to make it out friday if not i will pass by saturday if its open this weekend.

Kavik · « **Reply #142 on:** June 02, 2010, 04:44:54 PM »

ummmm, i heard they closed the shop again, did I hear wrong?

idipskoalmint · « **Reply #143 on:** June 02, 2010, 08:16:10 PM »

Quote from: Kavik on June 02, 2010, 04:44:54 PM

ummmm, i heard they closed the shop again, did I hear wrong?

My connection @ RPI still hasn't gotten a key AFAIK...

Nismonic · « **Reply #144 on:** June 04, 2010, 03:11:34 PM »

Quote from: Kavik on June 02, 2010, 04:44:54 PM

ummmm, i heard they closed the shop again, did I hear wrong?

Closed for the summer most likely. There are a few guys around all year that might be able to get you in. Dhutch sold his WRX so he doesn't get on here anymore but he is in Troy for the summer if you need to get in.

ctt1128 · « **Reply #145 on:** June 10, 2010, 02:31:51 PM »

Quote from: idipskoalmint on June 02, 2010, 08:16:10 PM

My connection @ RPI still hasn't gotten a key AFAIK...

haha your connection does have a key, as long as the security office is open and he is not drinking

spoolordie · « **Reply #146 on:** June 10, 2010, 02:42:05 PM »

Quote from: Nismonic on June 04, 2010, 03:11:34 PM

Closed for the summer most likely. There are a few guys around all year that might be able to get you in. Dhutch sold his WRX so he doesn't get on here anymore but he is in Troy for the summer if you need to get in.

yeh dhutch is the man except hes a 240 trader

deadlydave · « **Reply #147 on:** June 10, 2010, 02:48:49 PM »

Quote from: spoolordie on June 10, 2010, 02:42:05 PM

yeh dhutch is the man except hes a 240 trader

It's ok. Nobody's perfect.

korpsepatrol · « **Reply #148 on:** June 10, 2010, 02:50:07 PM »

So no shop during the summer then

I wanted to get these tires off my bbs'

Anyone in need of drag radials lol?

Kavik · « **Reply #149 on:** June 10, 2010, 02:51:58 PM »

Quote from: deadlydave on June 10, 2010, 02:48:49 PM

It's ok. Nobody's perfect.

yeah, some people update their sigs (love that btw) then still claim they don't drive a subaru under their avatar

edit: wait, you don't have an avatar. dammit, just fix your personal text under your name in the left hand side section

Author Topic: RPI Autoshop (Read 12732 times)