Topic: My Dump Rig (no dumptrucks inside) (Read 1773 times)

spoolordie · « **on:** November 29, 2010, 11:41:26 PM »

Finally got motivation lol to post my dumpy rig

2002 psm bugeye 86kmi now
93kmi with FMIC 4/12/11 now
95kmi with 26kmi on the vf48
103kmi ACT clutch and OEM Flywheel
104.5kmi Tranny go Boom Boom Replaced with 02 wrx 5spd 80kmi

287 whp and 264wtq on Moon's Mustang dyno 1800ft elev.

engine:
IHI vf48
820cc inj. (witchunters)
perrin inlet
perrin lightweight crank pulley
walbro 255lph
hks up-pipe
invidia catted dp
greddy ti-c (rewelded full 3in)
Turbo XS Fmic(stealthed out not by choice)
Turbo XS shorty intake
Turbo XS recirculated bpv
ACT SuperStreet Clutch w/ Oem Flywheel
DomTuned

suspension/handling/brakes:
perrin front sway 25mm
perrin rear sway 22mm
kartboy front and rear endlinks
botox bolts(lock down kit)
BC racing coilovers (inverted) F:8k R:6k
spc camber bolts
sportmaxx 050 (discontinued) 17x9 +38
falken rt-615's 235/40/17 (stretched)

muteki open end lugs
DBA 4000 front slotted rotors
stoptech rear slotted rotors
racing brake ET300 pads all around

interior/exterior:
Rally Armor UR flaps
Hella Supertones (white
JDM i Badge (pink)
Custom Lexan Scoop Delete (replace Genuine JDM STi scoop)
Debadged
Headlight mod
blacked out side markers
Color matched side skirts
AEM boost gauge/autometer gauge cup
Kenwood double din dvd player
Passport 8500 x50 (hardwired)

prolly some things i missed lol

Nice Pic Dirty Wagon took

New Paint on hellas

byroll01 · « **Reply #1 on:** November 29, 2010, 11:48:51 PM »

Quote from: spoolordie on November 29, 2010, 11:41:26 PM

prolly some things i missed lol

yeah like price...

GLWS

spoolordie · « **Reply #2 on:** November 29, 2010, 11:50:38 PM »

byron its not for sale lol ^^^

unless you want it hahah

byroll01 · « **Reply #3 on:** November 30, 2010, 09:06:56 AM »

haha, I thought this was a for sale thread!!!

Kavik · « **Reply #4 on:** November 30, 2010, 10:39:20 AM »

now that's a funny start to a'vehicle journal' thread

Spanky WRX · « **Reply #5 on:** November 30, 2010, 07:15:33 PM »

damn thats low. but looks good, keep up the good work.

RS25BG · « **Reply #6 on:** November 30, 2010, 11:13:09 PM »

Quote from: Spanky WRX on November 30, 2010, 07:15:33 PM

damn thats low. but looks good, keep up the good work.

he likes to drift bro.

madlife · « **Reply #7 on:** December 01, 2010, 09:23:21 AM »

man, that does look like a crap pile right from the dump. Seriously, who would run a vf39 on a 2.0?

RS25BG · « **Reply #8 on:** December 01, 2010, 09:44:49 PM »

Quote from: madlife on December 01, 2010, 09:23:21 AM

man, that does look like a crap pile right from the dump. Seriously, who would run a vf39 on a 2.0?

lol the whole subaru nation pretty much, but i feel like i know your kidding.

RedRoof2 · « **Reply #9 on:** December 21, 2010, 10:56:18 AM »

Quote from: madlife on December 01, 2010, 09:23:21 AM

man, that does look like a crap pile right from the dump. Seriously, who would run a vf39 on a 2.0?

The same stupid assholes that bought a Subaru in the first place. If you like to lick windows, your seat on the special bus is already reserved.

Kavik · « **Reply #10 on:** December 21, 2010, 10:59:06 AM »

and if the one you bought looks like a short bus....then what?

deadlydave · « **Reply #11 on:** December 21, 2010, 03:45:58 PM »

Quote from: Kavik on December 21, 2010, 10:59:06 AM

and if the one you bought looks like a short bus....then what?

Always wear your helmet, brotato.

spoolordie · « **Reply #12 on:** April 13, 2011, 09:38:59 PM »

TXS FMIC

nubs1094 · « **Reply #13 on:** April 14, 2011, 10:42:44 AM »

I'm dissapointed that this thread isn't about a dump truck

nice ride

Trev · « **Reply #14 on:** April 14, 2011, 11:10:12 AM »

Quote from: nubs1094 on April 14, 2011, 10:42:44 AM

I'm dissapointed that this thread isn't about a dump truck

nice ride

Thats what i thought aswell..

spoolordie · « **Reply #15 on:** April 14, 2011, 12:51:46 PM »

fixed^^

zeedeveel55 · « **Reply #16 on:** April 14, 2011, 01:21:48 PM »

so uh those vacuum lines (i think) that are made out of that clear braided tubing is going to crack being near all that heat.

nubs1094 · « **Reply #17 on:** April 14, 2011, 01:32:25 PM »

LMAO thanks for the fix

spoolordie · « **Reply #18 on:** April 14, 2011, 02:01:04 PM »

Quote from: zeedeveel55 on April 14, 2011, 01:21:48 PM

so uh those vacuum lines (i think) that are made out of that clear braided tubing is going to crack being near all that heat.

lowes hose lol so far they havent yet and theyve been on there for a year

ps there for the PCV system

spoolordie · « **Reply #19 on:** May 15, 2011, 06:57:54 PM »

Updated after dyno tune hahah

I DISLIKE Grimmspeed gaskets? they melt into pools of silver liquid?

spoolordie · « **Reply #20 on:** June 20, 2011, 09:56:28 AM »

Update: Car got caught in a Hail Storm

New Hood(already have)
Bumper Repainted to match
Sideskirts Repainted professionally (i did the nasioc DIY)

Yesterday Clean underside of car, changed oil, fixed squeaky exhaust.

List to do.
Relocated iPod cable
Change Trans/diff fluid
Vacuum Tee for PCV
Clean underside even more
Supertones painted white to match wheels
undertray and heat shield back on
Restore headlights shine lol

spoolordie · « **Reply #21 on:** September 08, 2011, 09:42:32 AM »

Hellas Painted white to match wheels........ pic on first post
.

spoolordie · « **Reply #22 on:** September 28, 2011, 04:25:46 PM »

photo shoot with the srt8 magnum

spoolordie · « **Reply #23 on:** November 21, 2011, 10:29:44 AM »

New ACT street clutch (SB3-HDSS)and OEM flywheel @ 102kmi

old flywheel had some hot spots lol

spoolordie · « **Reply #24 on:** January 16, 2012, 09:46:26 AM »

OUCH

Author Topic: My Dump Rig (no dumptrucks inside) (Read 1773 times)